Jun 8, 2020

AstraZeneca reportedly approaches Gilead for merger

Pharmaceuticals
covid-19
AstraZeneca
Gilead
William Smith
2 min
Pharmaceutical giant AstraZeneca is reportedly considering a potential merger with US pharmaceuticals rival Gilead Sciences
Pharmaceutical giant AstraZeneca is reportedly considering a potential merger with US pharmaceuticals rival Gilead Sciences...

Pharmaceutical giant AstraZeneca is reportedly considering a potential merger with US pharmaceuticals rival Gilead Sciences.

As reported by Bloomberg, last month the Cambridge, UK-headquartered AstraZeneca approached Gilead in May, without providing terms.

Both companies have been making strides in the response to COVID-19. In Gilead’s case, the company’s antiviral drug Remdesivir has been approved for use in the treatment of COVID-19 patients in many places, after having been shown to be effective at treating the illness.

A press release issued by the company said that its Phase 3 SIMPLE trial “demonstrated that patients in the 5-day remdesivir treatment group were 65 percent more likely to have clinical improvement at Day 11 compared with those in the standard of care group.”

AstraZeneca, meanwhile, recently announced the capacity to produce two billion of the COVID-19 vaccines it is developing with Oxford University researchers.

Having signed a $750mn agreement with CEPI and Gavi, healthcare companies backed by Bill and Melinda Gates, to manufacture, procure and distribute 300 million vaccine doses beginning at the end of the year, AstraZeneca further announced a licensing agreement with the Serum Institute of India (SII) to supply one billion doses of the vaccine to low and middle-income countries.

Pascal Soriot, Chief Executive Officer, AstraZeneca, said in a press release: “We are working tirelessly to honour our commitment to ensure broad and equitable access to Oxford’s vaccine across the globe and at no profit. Today marks an important step in helping us supply hundreds of millions of people around the world, including to those in countries with the lowest means. I am deeply grateful for everyone’s commitment to this cause and for their work in bringing this together in such a short time.”

Those partnerships build on existing ones in the UK and the US to supply 400 million Oxford University’s recombinant adenovirus vaccine, with AstraZeneca saying it was building supply chains globally to facilitate global access.
 

Share article

Jun 19, 2021

Driving sustainability in medical device production

medicaldevices
Sustainability
recycling
biotechnology
George I’ons
5 min
George I’ons, Head of Product Strategy and Insights at Owen Mumford Pharmaceutical Services on how technology is driving sustainability 

Environmental protection and stewardship are rapidly rising to the top of the corporate agenda and medical device businesses are no exception. The healthcare sectors of the United States, Australia, Canada, and England combined emit an estimated 748 million metric tons of greenhouse gases each year, an output greater than the carbon emissions of all but six nations worldwide. In order to curb this situation various European standards have been introduced. 

The Waste Electrical and Electronic Equipment (WEEE); Restriction on Hazardous Substances (RoHS); Registration, Evaluation, and Authorisation of Chemicals (REACH) and the Energy Using Products (EuP) regulations have all significantly altered manufacturing processes, specific labelling, compliance with disposal restrictions, and creation of instructions for end-of-life management and recycling.

At the moment many medical devices are currently exempt from these regulations but several directives, including RoHS and WEEE, are in the process of being reviewed and could be applicable in future. This is especially relevant for devices that are ‘connected’ and have a digital monitoring component which then brings them under the regulatory purview of authorities that govern devices with electronic components.

Safety, Usability and Sustainability

While medical device manufacturers have been working to respond to increasing demand for environmental sustainability from the market, they also have to contend with a key element of their mission: to ensure safety and usability to healthcare workers and patients. Parenteral and other invasive devices are strictly regulated to help reduce the risk of Healthcare Acquired Infection which typically runs as high as 5% and 8% in most developed countries, according to the European Centre for Disease Prevention and Control. As a result, they typically contain disposable single-use plastic elements.

At the same time, many hospitals and purchasing organisations have started to recognise that sustainable purchasing practices play a pivotal role in reducing costs over time. Many GPOs have appointed and empowered Senior Directors of Environmentally Preferred Sourcing who are successfully implementing the sustainable purchasing business case. In addition global pharmaceutical companies are increasingly creating senior positions with sustainability objectives as key to the role.

Medical device disposal is a particularly burning issue; generally carried out through incineration in the EU, it typically releases nitrous oxide, as well as known carcinogens including polychlorinated biphenyls, furans and dioxins. Some of the strategies trialled by manufacturers to reduce waste matter destined to incineration include sterilisation and reprocessing.

Sterilisation, however, falls short on the environmental front, and may consume more energy and produce more emissions than incineration itself. In the United States for example, 50% of all sterile medical devices are sterilised with ethylene oxide but since this method releases harmful emissions, the US Food and Drug Administration is now encouraging the development of new methods or technologies. Many other established sterilisation methods use glutaraldehyde that is not only harmful to the environment but also tends to be regulated by strict usage and disposal rules such as COSSH guidelines.

Focus on Recycling

The outlook on recycling is changing significantly thanks to new research and technologies enabling, for example, monomer extraction. Recycled polymers can be broken down to their constituent monomers promoting an almost limitless recyclability of some polymers. In addition to this, Polyvinyl chloride (PVC), renewable polyethylene and polyethylene terephthalate (PET) can be recycled several times without losing critical properties.

Reducing the impact of packaging can also significantly reduce the materials that need to be dealt with through either waste or recycling. Packaging manufacturers are decreasing packaging volume by favouring sealed trays instead of pouches, laser-etching instructions directly on to the tray where regulation permits it, or reducing the number of components required overall. In addition to this, for recycling plans to be successful it important to have a full understanding of the practices surrounding device use and to establish, where possible,  closed loop recycling systems that recover the waste materials from hospitals or patients and bring them back into the recycling process.

Sustainable Manufacturing: Technology and Research

Greater employment of fast degrading plastics or material from other sources is a key strategy to reduce harmful pollutants both at production and disposal stage. Bio-based materials can in fact offset the carbon emitted during processing as the monomer source grows, and a growing range of sources for bio based monomers -such as wood pulp or sugar cane- is available. However, when assessing the most suitable material for a part, the entire lifecycle of the product needs to be considered. For example: bio-degradable polymers can contaminate a recycling stream and emit methane when incinerated.

The use of environmentally friendly materials should also be supported by an increase in clean renewable energy sources. Lower energy consumption means fewer carbon emissions but also financial savings, making this an appealing measure for manufacturers. New technologies are proving a major gamechanger on this front, helping manufacturers marry their environmental stewardship with cost savings and efficiency.  3D printing, for example, can help develop optimum product moulds more quickly, refining production parameters to minimise raw materials volumes and maximising output productivity.

Similarly, ‘digital twin’ production software uses inline sensors to create a virtual, real-time mirror of the production environment to enable inline refinements. The objective is to achieve “zero defect”, waste-free manufacturing. In addition to this, LEAN manufacturing methodologies are already helping to optimise inventory management and reduce overproduction. 

Sustainability by Design

It is increasingly clear that effective environmental sustainability in the medical device sector cannot exist without a full view of the product life cycle from concept development, material selection, design and engineering to manufacturing, packaging, transportation, sales, use, and end-of-life disposal. These evaluations are typically made for factors such as manufacturing efficiency, time to market, or safety and regulatory compliance, packaging and transportation costs, but should be extended to energy efficiency and environmental impact by means such as life cycle analysis.  

In addition to this, with devices rapidly becoming more digitally connected, developers need to be aware that the costs of disposable electronics would simply not be viable, or indeed acceptable in the light of electronics disposal regulations. Design therefore should focus on creating a simple, repeatable interface between the two component sections so as not to impair the functionality or efficacy. As reducing waste and harmful emissions continues to exert businesses and governments globally, the medical devices industry cannot stand by. The environmental but also commercial implications of inaction are too serious and the array of solutions now available is exciting and diverse.

Share article