May 17, 2020

Does Your Hospital's Insurance Policy Cover Ebola?

Ebola
Hospital Insurance
Admin
2 min
As fear of Ebola infections spreads to developed countries, insurance companies have begun writing Ebola exclusions into standard insurance policies.
Two privately owned insurance brokers have teamed up with Lloyds of London underwriter Ark Syndicate to sell hospitals a product that insures against an...

Two privately owned insurance brokers have teamed up with Lloyd’s of London underwriter Ark Syndicate to sell hospitals a product that insures against any loss of profit from Ebola quarantine shutdowns.

According to Reuters, Miller Insurance Services LLP said the product it created with U.S. broker William Gallagher Associates would also protect hospitals against any potential losses to revenue in the aftermath of an Ebola quarantine.

This is the first time such a policy has been used.

Underwriting began last week and according to the news service, hospitals have been seeking such a product.

“The health care industry is at the forefront on the Ebola situation and faces a unique and augmented set of risk exposures,” said Gigi Norris, managing director of Aon Risk Solutions’ health care practice.

Aon Plc said it had created an Ebola task force to monitor the outbreak and help its clients prepare for potential risk exposures, duty of care and human capital concerns.

According to a report from Bloomberg News, the care of Thomas Eric Duncan – the first Ebola victim – likely cost approximately half a million dollars. Ebola care was estimated to cost $1,000 an hour because of the heightened intensive care costs of isolation, time-consuming protocols required for isolation and disposal of gear and patient waste.

The hospital who cared for Duncan is still unsure how the care will be paid for or if will write it off as charity care.

The death toll in the epidemic has risen to 4,546 out of 9,191 known cases in Guinea, Liberia and Sierra Leone, including 239 health workers, according to the World Health Organization.

Share article

Jun 19, 2021

Driving sustainability in medical device production

medicaldevices
Sustainability
recycling
biotechnology
George I’ons
5 min
George I’ons, Head of Product Strategy and Insights at Owen Mumford Pharmaceutical Services on how technology is driving sustainability 

Environmental protection and stewardship are rapidly rising to the top of the corporate agenda and medical device businesses are no exception. The healthcare sectors of the United States, Australia, Canada, and England combined emit an estimated 748 million metric tons of greenhouse gases each year, an output greater than the carbon emissions of all but six nations worldwide. In order to curb this situation various European standards have been introduced. 

The Waste Electrical and Electronic Equipment (WEEE); Restriction on Hazardous Substances (RoHS); Registration, Evaluation, and Authorisation of Chemicals (REACH) and the Energy Using Products (EuP) regulations have all significantly altered manufacturing processes, specific labelling, compliance with disposal restrictions, and creation of instructions for end-of-life management and recycling.

At the moment many medical devices are currently exempt from these regulations but several directives, including RoHS and WEEE, are in the process of being reviewed and could be applicable in future. This is especially relevant for devices that are ‘connected’ and have a digital monitoring component which then brings them under the regulatory purview of authorities that govern devices with electronic components.

Safety, Usability and Sustainability

While medical device manufacturers have been working to respond to increasing demand for environmental sustainability from the market, they also have to contend with a key element of their mission: to ensure safety and usability to healthcare workers and patients. Parenteral and other invasive devices are strictly regulated to help reduce the risk of Healthcare Acquired Infection which typically runs as high as 5% and 8% in most developed countries, according to the European Centre for Disease Prevention and Control. As a result, they typically contain disposable single-use plastic elements.

At the same time, many hospitals and purchasing organisations have started to recognise that sustainable purchasing practices play a pivotal role in reducing costs over time. Many GPOs have appointed and empowered Senior Directors of Environmentally Preferred Sourcing who are successfully implementing the sustainable purchasing business case. In addition global pharmaceutical companies are increasingly creating senior positions with sustainability objectives as key to the role.

Medical device disposal is a particularly burning issue; generally carried out through incineration in the EU, it typically releases nitrous oxide, as well as known carcinogens including polychlorinated biphenyls, furans and dioxins. Some of the strategies trialled by manufacturers to reduce waste matter destined to incineration include sterilisation and reprocessing.

Sterilisation, however, falls short on the environmental front, and may consume more energy and produce more emissions than incineration itself. In the United States for example, 50% of all sterile medical devices are sterilised with ethylene oxide but since this method releases harmful emissions, the US Food and Drug Administration is now encouraging the development of new methods or technologies. Many other established sterilisation methods use glutaraldehyde that is not only harmful to the environment but also tends to be regulated by strict usage and disposal rules such as COSSH guidelines.

Focus on Recycling

The outlook on recycling is changing significantly thanks to new research and technologies enabling, for example, monomer extraction. Recycled polymers can be broken down to their constituent monomers promoting an almost limitless recyclability of some polymers. In addition to this, Polyvinyl chloride (PVC), renewable polyethylene and polyethylene terephthalate (PET) can be recycled several times without losing critical properties.

Reducing the impact of packaging can also significantly reduce the materials that need to be dealt with through either waste or recycling. Packaging manufacturers are decreasing packaging volume by favouring sealed trays instead of pouches, laser-etching instructions directly on to the tray where regulation permits it, or reducing the number of components required overall. In addition to this, for recycling plans to be successful it important to have a full understanding of the practices surrounding device use and to establish, where possible,  closed loop recycling systems that recover the waste materials from hospitals or patients and bring them back into the recycling process.

Sustainable Manufacturing: Technology and Research

Greater employment of fast degrading plastics or material from other sources is a key strategy to reduce harmful pollutants both at production and disposal stage. Bio-based materials can in fact offset the carbon emitted during processing as the monomer source grows, and a growing range of sources for bio based monomers -such as wood pulp or sugar cane- is available. However, when assessing the most suitable material for a part, the entire lifecycle of the product needs to be considered. For example: bio-degradable polymers can contaminate a recycling stream and emit methane when incinerated.

The use of environmentally friendly materials should also be supported by an increase in clean renewable energy sources. Lower energy consumption means fewer carbon emissions but also financial savings, making this an appealing measure for manufacturers. New technologies are proving a major gamechanger on this front, helping manufacturers marry their environmental stewardship with cost savings and efficiency.  3D printing, for example, can help develop optimum product moulds more quickly, refining production parameters to minimise raw materials volumes and maximising output productivity.

Similarly, ‘digital twin’ production software uses inline sensors to create a virtual, real-time mirror of the production environment to enable inline refinements. The objective is to achieve “zero defect”, waste-free manufacturing. In addition to this, LEAN manufacturing methodologies are already helping to optimise inventory management and reduce overproduction. 

Sustainability by Design

It is increasingly clear that effective environmental sustainability in the medical device sector cannot exist without a full view of the product life cycle from concept development, material selection, design and engineering to manufacturing, packaging, transportation, sales, use, and end-of-life disposal. These evaluations are typically made for factors such as manufacturing efficiency, time to market, or safety and regulatory compliance, packaging and transportation costs, but should be extended to energy efficiency and environmental impact by means such as life cycle analysis.  

In addition to this, with devices rapidly becoming more digitally connected, developers need to be aware that the costs of disposable electronics would simply not be viable, or indeed acceptable in the light of electronics disposal regulations. Design therefore should focus on creating a simple, repeatable interface between the two component sections so as not to impair the functionality or efficacy. As reducing waste and harmful emissions continues to exert businesses and governments globally, the medical devices industry cannot stand by. The environmental but also commercial implications of inaction are too serious and the array of solutions now available is exciting and diverse.

Share article